Corazón del Mar Moonbat Dragonfly

1.350,00 1.700,00 

High-quality diver-style timepiece

Delivery time: After receipt of order individually manufactured in our manufactory: 14 working days

Artikelnummer: CDM2017-01-2-red-1-1-1-1-2 Kategorie:


The Corazón del Mar - Moonbat "Dragonfly" with its shining yellow is a true signpost in a night as dark as it may be. Her yellow ring and the yellow eyes on the 12 shine in addition to the hands and indices in the dark. A very striking and sporty look, especially with the optional leather strap. The high-gloss dial lends the watch a special depth, which becomes a real eye-catcher due to the refractions of light on the equally shiny bezel.

Data in the overview:

  • Stainless steel case with 43mm diameter and transparent sapphire crystal on both sides
  • 200m waterproof
  • Ceramic Bezel
  • Swiss automatic movement Sellita SW 200-1 / ETA 2824-2 (28,800 A/h, 26 jewels, 38 hours power reserve, hours, minutes, central second)
  • blued screws
  • Sapphire crystal Floor
  • Steel Bracelet (optional additional leather strap as shown on the picture)
  • Pointer and indices filled with Super-LumiNova

Exceptional Additional Features:

  • Ceramic inlay! The inlays give the watch an unrivalled look.
  • Decorated rotor with set sapphire (The heart of the ocean or Corazón del Mar).
  • Cabochon bead as moisture indicator: We will use a cabochon bead on the rotor which, should moisture penetrate the case, will absorb a part of it for protection and at the same time indicate this by changing colour from blue to red!
  • Housing with argon flooded: to keep almost any moisture from the housing, we will flood it with the gas "argon".
  • With 7 screws fixed ground: Unlike most screwed floors, our ground is not turned on, which is not good for the gasket due to the cross friction, but is fixed with 7 screws. When the watch is dipped, the pressure is more and more naturally pressed on the gasket and thus increases the safety that no water can enter the housing.
  • Made in Germany: We have a very high vertical range of manufacture. We shell the movements ourselves and each movement is checked for accuracy. We decorate the rotor independently with sapphire and place the cabochon pearl. We flood the case with argon and attach the wishing band. We print the dials ourselves.

Exact dimensions of the watch:

  • diameter: 43mm
  • Horn to horn: 51mm
  • height: 13mm
  • Weight without strap: 75g
  • Weight with steel strap: 145g
  • Tape lug: 22mm

Zusätzliche Informationen

Weight 1 kg
Size 20 × 20 × 20 cm


There are no reviews yet.

Only registered customers who have purchased this product may submit a review.